How to install

If you have a spare iPhone or iPad or iPod touch, don’t keep it in your desk but use it as a seismometer with iShindo application.
Here we show how to install your device (iPhone/iPad/iPod touch) in your home.
Wi-Fi network in your home is preferable so that you can check how your home is safe after a shake anywhere you go out.

Installation site

To measure an earthquake precisely, put your device firmly on a wall of a room or on a pillar of your house.
Build-in furniture is acceptable for installation and you can avoid setting on a door of it.

  • a wall - Good!
  • unfixed furniture - NG!
  • a door of a shelf or a closet - NG!

Preparation

Preparation

  • [A]a spare iPhone※1
  • [B]USB cable
  • [C]Power supply adaptor
  • [D]Extension code
  • [E]Adhesive material (double-face tape)※2)
  • ※1 Set Wi-Fi ON.
  • ※2 We recommend the double-face tape that can be removed without any marks on the object (e.g. “3M Command Refill Strips”).
    [Product Info] ⇒  Command Refill Strips 

Installing Procedures

1

Put double-faced tape
on the reverse side of the device.

reverse side of the device

2

Press the device to put on a wall
or on the surface of fixed furniture

press the device

3

Connect the USB cable and the power
supply adaptor to the device.

power connection

※Use extension code if necessary.

4

Tap the iShindo icon on your device
display to start the application.

iShindo

Made it!


to PAGE TOP