Slitter for Film and Foil
Slitter PA300 for high accuracy and high minute foil is small Slitter that aims to cut a paper, a film, a metallic foil, and the combined material by a higher quality.
The HAKUSAN cutter stand is equipped. Hereby the high appraisal has been received for cutting of highly accurate electronic material.
In a metallic foil, the resin, and the combined material, it was not possible to achieve by a past method, and the offer of 'Accuracy of cutting' and 'Steady production quality' is enabled.
Merit
- Equipped with highly accurate cutter stand
Various blade unit and highly accurate cutter stands corresponding to the cutting method are equipped.
Everyone becomes possible to steady blade unit, and offers a steady cutting quality. - Corresponds to various winding
Each friction of minute width is possible according to our original winding friction method.
In addition, it corresponds to various winding such as changes in easy winding inside diameter, rolled directory, winding spool and winding bobbin. - Consideration for operation
For the steady operation, it was equipped with a digital control and the optimal value of the preset function.
It is also possible to monitor the state of driving and braking machine in real time, and to accumulate as information, and improves the maintenance. - Minute width can be cut
1mm in width cutting is achieved by adopting the gang cutting method.
A different kind and the different width cutting are easily achieved.
Cutting of 1mm or less in width is also possible according to the cutter.
Specification
- Width of material
- Max 300mm
- Unwind outer diameter
- Max φ350mm
- Unwind shaft dimension
- φ3inch(φ76.2mm)×L400mm another size is acceptable
- Weight of base material
- MAX 60Kg
- Cutting system
- Ultra-high accurate gang slit system
Other methods are also possible - Plate hold
- Ring-finger system
- Rewind outer diameter
- Max φ350mm
- Rewind minimum diameter
- φ3inch(φ76.2mm) When each friction unit is used.
- Rewind weight
- Max 60kg (30kg/1 shaft)
- Rewind system
- 2 shaft each friction winding system
- Minimum cutting width
- 1mm
- Line speed
- 100m/min
- Power supply
- AC200V 50/60Hz
- Weight
- Machine:1500kg Control board:400kg